Aircraft Painter

Fairhope, AL
Contracted to Full Time
Experienced

TEL Staffing is hiring an Aircraft Painter to join our team in Fairhope, AL.

*1 year of Aircraft Painting experience REQUIRED

Position Summary: To perform the cleaning, welding, sheet metal, and painting of engines, and components. This position may work with hazardous and non-hazardous chemicals, as well as products to perform required tasks. This position is considered safety-sensitive in accordance with DOT and FAA regulations and as such, subject to drug and alcohol testing per FAA's regulations.

Purpose of Position:  To assist in the supervision of department staff and to give directions in the cleaning, welding, sheet metal, and painting of engines, and components. This position may work with hazardous and non-hazardous chemicals, as well as products to perform required tasks. This position is considered safety-sensitive in accordance with DOT and FAA regulations and as such, subject to drug and alcohol testing per FAA's regulations.

Essential Functions: (must be able to perform these functions, with or without a reasonable accommodation).  

  • Cleans aviation parts with PRF680(mineral spirit), glass and plastic bead

  • Prepares for painting by cleaning, stripping, sanding, or chemically treating if needed

  • Preps parts (clean, tape, aluminum prep, alodine) for painting

  • Cures specific parts using oven as necessary

  • Cleans prep and paint area before, after, and during operations

  • Adequately cleans paint guns and paint equipment after each use

  • Maintains a clean workstation free from Foreign Object and or Debris (FOD), ensures tooling is properly stored

  • Maintains a clean/safe workspace free from spills or obstructions which may lead to harm

  • Properly disposes of excess materials throughout the operation

  • Works in accordance with applicable FAR’s, bulletins, maintenance manuals and acceptable practices

  • Must be able to perform duties with little or no supervision 

  • Works to production schedule as directed by manager/lead

  • Must read routing tags/sheets/traveler and follow directives

  • Travels as required

  • Confers with manager/lead to recommend changes such as: equipment utilization, production methods and procedures to increase efficiency of department and promote improvement

  • Attends all safety and health training, as required, in a timely manner

  • Works when scheduled and complies with company attendance policy

  • Works overtime as needed

  • Observes and practices all safety procedures and personal policies (e.g. Safety-glasses, ear plugs, face shields etc.)

Skills, Knowledge and Abilities: (these are required to enable job holder to perform the essential functions of the job).

  • Must be able to read and interpret SDS and Technical Data Sheets to safely mix paints in accordance with specifications

  • Must be able to use scales for mixing ratios

  • Must be able to maintain an effective working relationship with, and among co-workers and supervisors. 

  • Must be able to work with little or no supervision and to take initiative

  • Must be able to use applied knowledge to formulate positive solutions to problem situations

  • Must be able to apply common sense

  • Must be able to effectively read, write and communicate in English

  • Must be proficient in specific company software and Microsoft Office Word and Excel

  • Must be able to add, subtract, multiply and divide, using fractions and decimals; compute percentages, ratios, rates and interpret graphs 

  • Must be able to comply with OSHA requirements and standards to properly wear all applicable PPE

  • Must be able to lift and carry up to 50 lbs. regularly and more, with assistance occasionally

  • Must be able to see within normal range of vision with or without corrective lenses

  • Must be able to hear running machinery

  • Must be able to use hands, wrists, and fingers repetitively

  • Must have exceptional eye-hand coordination

  • Must regularly be able to reach overhead

  • Must regularly be able to squat, bend, twist and stand

  • Must be able to walk around regularly using steps occasionally

  • Ability to provide verifications of US citizenship or permanent residency to satisfy ITAR/EAR restrictions 

Marginal Functions: (Duties that are likely to be assigned to this person, unless he / she proves unable to perform them after receiving training and / or accommodations that the company judges appropriate).

  • Other duties as assigned.

Work Conditions:

Frequently exposed to moving mechanical parts and occasionally exposed to fumes or airborne particles and vibration. Noise is generally loud. 

Experience and Education Requirements: 

  • High School Diploma or GED required.

  • One (1) year of aircraft painting experience is required.

  • Experience working in a manufacturing environment is preferred.

  • Must pass a criminal background check and DOT pre-employment drug screen and comply with all FAA regulations. Position is considered safety-sensitive in accordance with DOT and FAA regulations and as such, subject to drug and alcohol testing per FAA's regulations.

  • Ability to provide verifications of US citizenship or permanent residency to satisfy ITAR/EAR restrictions.

TEL is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status



Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*