Electrical Maintenance Engineer

Milton, FL
Full Time
Industrial and Manufacturing
Experienced
We are seeking an Electrical Maintenance Engineer to support the operation, maintenance, troubleshooting, installation, and continuous improvement of electrical and automated manufacturing equipment at our facility in Milton, FL.


Position Summary
This position will work closely with Maintenance, Production, Engineering, and equipment technicians to troubleshoot equipment issues, reduce downtime, improve equipment reliability, and support the installation and commissioning of new manufacturing equipment.

The position is well suited for candidates who enjoy hands-on troubleshooting and working directly with industrial machinery, electrical systems, PLCs, drives, and automation equipment.

Key Responsibilities:
  • Troubleshoot electrical and control-system problems on manufacturing equipment.
  • Diagnose PLC, HMI, VFD, servo drive, sensor, motor, and industrial communication issues.
  • Support 480V three-phase electrical systems, motors, transformers, motor starters, contactors, circuit breakers, control panels, and related equipment.
  • Read and interpret electrical schematics, wiring diagrams, PLC drawings, equipment manuals, and technical documentation.
  • Assist with PLC and HMI troubleshooting and programming modifications.
  • Configure, troubleshoot, and replace variable frequency drives and other motor-control equipment.
  • Identify causes of recurring equipment failures and implement corrective actions.
  • Support preventive and predictive maintenance activities.
  • Assist maintenance technicians and electricians with complex equipment troubleshooting.
  • Support installation, startup, testing, and commissioning of new manufacturing equipment.
  • Work directly with equipment manufacturers and technical technicians during equipment installation and commissioning.
  • Learn equipment operation, electrical systems, control logic, troubleshooting procedures, and maintenance requirements from equipment manufacturers and installation technicians.
  • Develop and maintain troubleshooting procedures, electrical documentation, maintenance instructions, and equipment records.
  • Support electrical upgrades and modifications to existing production equipment.
  • Assist with the selection and standardization of electrical components, sensors, drives, motors, and control hardware.
  • Analyze equipment downtime and recommend improvements to increase reliability and production availability.
  • Participate in root cause analysis for major or recurring equipment failures.
  • Support continuous improvement and plant expansion projects.
  • Provide electrical and controls support to production as needed.

Minimum Qualifications:
  • Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, Automation Engineering, Controls Engineering, or a closely related field.
  • Strong understanding of basic electrical engineering principles.
  • Ability to read and understand electrical schematics and wiring diagrams.
  • Basic knowledge of three-phase electrical systems, motors, and industrial controls.
  • Strong troubleshooting and problem-solving skills.
  • Willingness to work hands-on with industrial manufacturing equipment.
  • Ability to work effectively with engineers, technicians, electricians, production personnel, and equipment manufacturers.

Preferred Qualifications:
  • 0–3 years of experience in electrical maintenance, electrical engineering, industrial automation, controls, manufacturing, or equipment support.
  • Recent graduates with relevant internship, co-op, laboratory, or academic project experience are encouraged to apply.
  • Experience with Siemens, Allen-Bradley, Mitsubishi, or similar PLC systems.
  • Experience with ABB, Siemens, Danfoss, or similar variable frequency drives.
  • Familiarity with PLCs, HMIs, servo systems, sensors, and industrial automation.
  • Familiarity with Profinet, Profibus, Modbus, industrial Ethernet, or similar communication systems.
  • Experience with industrial motors, motor controls, and three-phase power systems.
  • Familiarity with manufacturing processes such as extrusion, wire drawing, stranding, material handling, payoff/take-up systems, or other automated production equipment is a plus.
  • Experience with equipment installation, startup, or commissioning is a plus.

Training and Equipment Knowledge Transfer:
  • New Electrical Maintenance Engineers will work closely with our current equipment technicians during installation, startup, and commissioning of new production equipment.
  • The technicians will provide hands-on training on equipment operation, electrical systems, PLC and drive controls, troubleshooting procedures, and maintenance requirements.
  • The objective is to transfer equipment knowledge to the permanent maintenance team and establish a strong in-house capability to support, troubleshoot, and maintain the equipment after installation and commissioning activities are completed.


TEL Staffing complies with regulations enforced by the EEOC. TEL Staffing is a drug-free workplace.
Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status



Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*